LIGHTNING ARRESTER

A lightning arrester is a device used on electrical power systems and
 telecommunications systems to protect the insulation and conductors 
of the system from the damaging effects of lightning. The typical lightning arrester 
has a high-voltage terminal and a ground terminal. When a lightning surge 
(or switching surge, which is very similar) travels along the power line to the arrester, 
the current from the surge is diverted through the arrestor, in most cases to earth.

Lightning Arrester is a vital equipment of Traction substation
(TSS), sub-sectioning post (SSP) and sectioning
post (SP). Its proper upkeep and maintenance is necessary
to ensure good reliability and trouble free service.

In telegraphy and telephony, a lightning arrestor is placed where wires enter a structure, 
preventing damage to electronic instruments within and ensuring the safety of individuals near them. 
Smaller versions of lightning arresters, also called surge protectors, are devices that
 are connected between each electrical conductor in power and communications systems 
and the Earth. These prevent the flow of the normal power or signal currents to ground, 
but provide a path over which high-voltage lightning current flows, bypassing the connected equipment. 
Their purpose is to limit the rise in voltage when a communications or power line is struck by lightning

Transformers (Power/Distribution) and Overhead Line Material are available in Warehouse 

FOR FURTHER ENQUIRY CALL:  +234806 223 2236; +234808 956 2582

email: newbayengineering@gmail.com

fiberglass cross arm is
produced for the unusual desire of purchasers, customers etc. of the
beneficial industry, deadends and
transmission cross arm is  designed and build out to
perform better than  wood and other composite metal used  –
with a track record to prove it.
Field-ready in comparative evaluation  sizes, or
made-to-order and drilled to spec, count on
cross arm for superior load capacity and
consistent performance.

OFFLOADING EQUIPMENT AND MATERIALS FOR CONSTRUCTION OF 1 X 15MVA INJECTION SUBSTATION POWER TRANSFORMER AT ALOR IN ANAMBRA STATE BY NEWBAY ENGINEERING

Newbay Engineering

Newbay Engineering Limited was incorporated in 1999 and has since been operating in
Power Engineering, Equipment, Procurement and Construction of Electrical Power Projects 
in high, medium and low Voltages.
Newbay is being run by a team of Professional with a combined experience in Engineering 
fields spanning several decades. 
Newbay is also involved in the Importation, Supply, Sales and Install action of Electrical
Materials and Equipment of high standard mostly from Europe, China, India, South Korea and 
aiming to expand its operations within the Power Industry.
Newbay has Staff Strength of over 20 Professionals (Management Staff and Engineers) with
several Technicians and other staff who are well trained on their various fields.